Cisco ONS 15540 ESPx Installing page 31

Chapter 2 Installing the Cisco ONS 15540 ESPx
Figure 2-14 Installing the 10-GE Transponder Module
Step 4 Attach the appropriate cables.
Check the LEDs to ensure proper installation. See
Step 5
Type 2 extended range transponder module LED descriptions.
Allow two minutes for the 10-Gbps laser on the 10-GE transponder module to
Note
warm up before it transmits traffic.
78-16436-01
Cisco ONS 15540 ESPx Hardware Installation Guide
Installing and Removing Modules
Table 1-15 on page 1-25 for
2-31