Table of Contents
Advertisement
Power Supply PS1000-A6-48.5
Intended Use
3
Intended Use
This device is designed for installation in an enclosure and is intended for the general
professional use such as in industrial control, office, communication, and instrumentation
equipment.
Do not use this device in equipment, where malfunction may cause severe personal injury
or threaten human life.
Function
The device is used to supply field devices with 48 V DC and 5.4 A.
The device has a power reserve of 20 % included, which may even be used continuously
at temperatures up to +45 °C.
The output voltage can be adjusted via a potentiometer. The device status is indicated
by an LED.
The device has a relay contact output for remote monitoring.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
Reference Conditions
All parameters are specified at 48V, 5.4A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes
run-in time unless otherwise noted.
7
Advertisement
Table of Contents
