Advertisement
Quick Links
Advertisement
Related Manuals for insize ISQ-TS120K
Summary of Contents for insize ISQ-TS120K
- Page 1 MN-ISQ-TS120K-E www.insize.com ISQ-TS120K DIGITAL LED TACHOMETER/STROBOSCOPE OPERATION MANUAL...
- Page 3 Warning 4.6.3 LCD back light off The LED backlight will automatically shut off after 2 minutes Please closely follow all safety precaution. of no keypad or dial operation when using the LCD backlight Be sure to read the entire instruction manual thoroughly will light again with keypad or dial operation.
- Page 4 Do not alter, modify or dispose of improperly. Such action may Operation Expression cause damage accidents and void warranty. Operate with 0-35℃(32-95℉), 35-38%RH Use outside of this range may alter operation of the unit. To clean, gently wipe with a soft cloth. This unit may become excessively hot when used Press and continuously for more than 2 hours.
- Page 5 4.5.2.2 Delay angle setting Setting accuracy(Vibration): ±0.01% et the resolution( Vibration As period of external input is 360°, the delay angle can be 60 ~ 120000FPM (Flash Per Minute) 0.1 FPM 1~200Hz 0.01Hz set form 0° to 360° by every 1°. Delay angle setting increases LED Spec: USA CREE 10W LED light, life time is 3-5 years.
-
Page 6: Power Key
4.5.2 Delay setting Name Function Instructions Delay time angle setting will allow the flash to be delayed POWER key Power the unit on and off after an external pulse is transmitted to the stroboscope. It Select mode of operation: can be set in either external trigger mode, or in parameter MODE key Internal/External/Parameter setting mode. - Page 7 Example: When trigger edge setting is set to “up edge”. The 3.3 LCD Display flash will occur on the leading edge of the input pulse(when 3.3.1 Display Names and Descriptions delay setting is zero). Battery Main data display Setting External pulse sign al project Unit from machine/sensor...
- Page 8 Internal flashing mode Operation Expression - Set the positive edge in external trigger mode - Set the negative edge in external trigger mode - Set the measuring range in parameter setting mode* Set the flash time - Choose UP when set trigger edge in *parameter setting mode Measuring range Trigger edge setting...
-
Page 9: Function Instructions
turned clockwise, and increase as it is turned counter Function Instructions clockwise. 4.1 Power on/off 4.4.5 ECO feature When the unit is off, press the POWER key to turn on the unit. To reduce the brightness and conserve battery power, press The unit begin to flash in internal mode and the display will the ECO key. - Page 10 4.3 Internal flashing mode flashes at the delay angle=0°. Delay angle increase as the dial is rotated to the right. The 4.3.1 Instruction for internal flashing mode angle settings will go to 0°as the angle increase past 359°. Battery power Flashing time indication (Hz shown) setting...
- Page 11 turned clockwise, and increase as it is turned counter resolution will be different according to the selected clockwise. measuring range. For details regarding the setting measuring range, please see 4.5.1. Expression Operation Notes for setting the flash rate. One function of stroboscope is to provide a “stopped” image of a rotating target when the flash rate of the stroboscope has matched the rotational speed of the target object.
- Page 12 Operation Operation Indication Indication Press and release Press and release Ex. Flash rate 1500fpm New flash rate 3000fpm New flash rate 6000fpm Setting delay angle Setting delay time Note: The use of the x2 key will have no effect when 4.4.3.1 Delay time setting(Dynamic continuous time delay multiplication of current flash would result in a value that setting)
- Page 13 set the "C" value(Unit:mm) decreased 3 , each time the “PHASE+” or “PHASE-”key is ° 2) Continuous press “SET” three times again, LCD screen pressed. The display will show the cumulative angle of the display the length of the detected object (using “H” express), phase shift.
- Page 14 Operation Operation Indication Indication Press and release Flash duration 0.1 /2.5 ° ° Flash duration 0.2 /2.5 ° ° Flash duration 2.5 /0.1 ° ° Phase shift angle flash delay angle Press and release Press and release Flash duration 2.5 /0.1 °...
Need help?
Do you have a question about the ISQ-TS120K and is the answer not in the manual?
Questions and answers