Advertisement
Advertisement
Table of Contents
Related Manuals for insize ISU-300D
Summary of Contents for insize ISU-300D
- Page 1 MN-ISU-300D-E www.insize.com ISU-300D ULTRASONIC THICKNESS GAUGE OPERATION MANUAL...
- Page 2 Specification Of Transducers Attention In order to obtain good measurement precision, you need to clear away the rusty, sundry, grease, etc. on the working surface. Frequency Measuring range Code Diameter( Ød Please use the couplant on the working surface, measure repeatedly around the target area and take average value.
-
Page 3: Technical Specification
Technical Specification Glycerin 0.075 1900 Gold 0.130 3200 0.160 4000 T-E: 0.8mm～300mm Measurement range Inconel 0.220 5700 E-E: 4mm～25mm Iron 0.230 5900 0.01mm(0.001〞), 0.1mm (0.01〞) Resolution Iron (cast) 0.180 4600 Velocity range 1000m/s～9999m/s Lead 0.085 2200 Measurement rate 4 /s and 10/s in fast mode Magnesium 0.230 5800... -
Page 4: Sound Velocity
Press key into the menu, the screen will display: Codel Measuring Range Frequency Temperature 1. Power off 2. Gain adjustment 3. Language 4. Contrast 5. Default 6. Information T-E: 0.8-300mm/0.03-12.00" Press key into the selected item, press key to confirm. ISU-T07 5.0MHZ <60℃/140°F... -
Page 5: Display Screen
Press key to enter/confirm. 3. Calibration Function Press key into menu. Press key into “Calibration”. --On/Off Key Measure the test piece with known thickness. If measured value is different than the known value of the test piece, --Esc. Menu adjust the measured value by pressing key and then press --Menu Key key. -
Page 6: Basic Gauge Operations
① Measurement value Average - The gauge will display the average thickness of 2-9 ② measurements. Battery life ③ Measurement model Limitation - The gauge will alarm you of low or high thresholds via ④ Resolution audible sound. ⑤ Current transducer model Scan - The gauge will alarm for each fast measurement.
Need help?
Do you have a question about the ISU-300D and is the answer not in the manual?
Questions and answers