Basic Operation; Measure And Source - East Tester ET-2712 RTD User Manual

2 Basic Operation

2.1 Measure and Source

This section acquaints you with some basic operations of ETX-2012/ ETX-1812.
Proceed as follows:
1. The connection of the calibrator as shown in Figure 2.1-1.
2. Press
checks itself, including check on internal circuit and LCD, during which, LCD
displays all contents for 1s, the interface is shown in Figure 2.1-2:
for more than 2 seconds to turn on the calibrator. The calibrator
Figure 2.1-1
Figure 2.1-2
5