⑥
⑦
⑧
⑨
⑩
⑾
⑿
⒀
⒁
⒂
1.5 Display Screen
Sets and saves calibrator parameters setting
Recovers factory default setting
Sets manual output
Cycles through:
slow repeating 0%-100%-0% ramp
Fast repeating 0 % - 100 % - 0 % ramp
Repeating 0 % - 100 % - 0 % ramp in 25 % steps
Set output by 0% of span, Press and hold to store the source value
as the 0 % value
Decrements output by 25% of span.
Increments output by 25% of span.
Sets output by 100% of span, Press and hold to store the source
value as the 100 % value.
Selects voltage mode
Selects resistance mode
Figure 1.5-1
4