System Configuration With Cm And Auto-Trigger - Siemens SIMATIC MV500 Operating Instructions Manual

Network and system integration

4.7 System configuration with CM and auto-trigger

4.7 System configuration with CM and auto-trigger
①
Figure 4-6
System characteristics
• Power supply and system integration are provided through a communication module or
over Ethernet.
• To trigger the reader, no light barrier or similar must be installed. The triggering is
performed in the optical reader itself, as soon as a readable code comes into the field of
view of the optical reader (auto-trigger).
• A PC/programming device is connected via Ethernet to allow adjustment of the device.
100
Object with code
Example: System configuration of optical reader with auto-trigger function
Operating Instructions, 03/2021, C79000-G8976-C494-05
SIMATIC MV500