Table of Contents
Advertisement
Quick Links
SIMATIC MV326
SIMATIC Ident
Optical identification
SIMATIC MV326
Operating Instructions
08/2021
C79000-G8976-C644-02
Preface
Safety notes
Description
Commissioning
Operate
Alarm, error and system
messages
Maintenance and service
Technical data
Dimension drawings
Ordering data
Appendix
Service & Support
1
2
3
4
5
6
7
8
9
A
B
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC MV326
Summary of Contents for Siemens SIMATIC MV326
- Page 1 SIMATIC MV326 Preface Safety notes SIMATIC Ident Description Commissioning Optical identification SIMATIC MV326 Operate Alarm, error and system messages Operating Instructions Maintenance and service Technical data Dimension drawings Ordering data Appendix Service & Support 08/2021 C79000-G8976-C644-02...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Preface
FS: A1 SIMATIC MV326 NOTICE Differences compared to the previous product: This manual describes the product SIMATIC MV326. This module replaces the previous product SIMATIC MV325. Note the following differences and special features compared to the previous product SIMATIC MV325: •... - Page 4 Preface Product description The SIMATIC MV326 optical handheld reader is a sophisticated, powerful and versatile bar code reader for manual operation. Typical areas of application: Health care, pharmacy, retail trade and manufacturing. Figure 1 SIMATIC MV326 Product designation In the remainder of this document, the term "device" or "optical handheld reader" is also used instead of the full product name, "SIMATIC MV326".
- Page 5 Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to...
- Page 6 Preface SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 7: Table Of Contents
Switching on the optical handheld reader ................16 Establishing a Bluetooth connection ................... 17 Operate ..............................19 Aligning the SIMATIC MV326 optical handheld reader ............19 Enabled and disabled codes in the factory settings ............. 20 Enabling "Suffix - Enter" ..................... 20 Alarm, error and system messages ..................... - Page 8 Table of contents SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 9: Safety Notes
Changes or modifications to the device Changes or modifications not expressly approved by the person responsible for adherence to the relevant regulations could result in the loss of the user's operating approval for the device. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 10 Safety notes SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 11: Description
Description Product package The SIMATIC MV326 optical handheld reader (article number 6GF3326-0HT01) is supplied with the following components: • SIMATIC MV326 optical handheld reader • Battery • Charging station with USB interface and Bluetooth wireless interface • USB connecting cable (standard USB ↔ micro USB) - Page 12 • The housing, which is resistant to disinfectants and has IP65, prevents damage to plastic parts and protects the electronics and optics. • Paging button supports the localization of the mobile optical handheld reader. • Reads barcodes on mobile devices. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 13: Commissioning
1. Insert the battery on the back of the device. If the battery is inserted correctly, it locks in place. Proceed as follows to remove the battery: 1. Move the slider ① on the device. Result: The battery is unlocked. 2. Remove the battery in the direction of the arrow ②. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... -
Page 14: Charging The Optical Handheld Reader
1. Connect the USB cable of the charging station to the USB port of the computer. 2. Remove the protective foil on the reader window. 3. Place the device into the charging station ①. ① Charging station SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 15 No LED is on One LED is flashing fast < 10% One LED is on < 25% Two LEDs are on 25% to 50% Three LEDs are on 50% to 75% Four LEDs are on > 75% SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 16: Switching On The Optical Handheld Reader
Proceed as follows to switch on the device: 1. Press one of the buttons ① for 1 s. Result: The optical handheld reader beeps, vibrates, and the LEDs are flashing when the device is turned on and ready for operation. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... -
Page 17: Establishing A Bluetooth Connection
Using the SIMATIC MV326 in an area with WLAN communication When you use the SIMATIC MV326 in an area with WLAN communication, this may result in interference. We, therefore, recommend that you select the 5 GHz frequency range for the WLAN communication and take this into account in the radio field planning. - Page 18 Commissioning 3.4 Establishing a Bluetooth connection SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 19: Operate
Operate Aligning the SIMATIC MV326 optical handheld reader Proceed as follows to align the reader: 1. Press a button or the trigger button of the optical handheld reader. 2. Keep pressing the button or trigger button. The two blue beams sent out by the optical handheld reader are used for targeting. -
Page 20: Enabled And Disabled Codes In The Factory Settings
In the factory settings of the optical handheld readers, "Suffix - Enter" is disabled. To enable "Suffix - Enter", scan in the required configuration code: • Suffix Enter (USB Keyboard Mode Only) A list of the mentioned codes is available in the manual "MV326 Configuration Guide (https://support.industry.siemens.com/cs/ww/en/ps/15161/man)". SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... -
Page 21: Alarm, Error And System Messages
Feedback messages of the optical handheld reader Situation LED displays on the Acoustic signal Vibration signal optical handheld reader SIMATIC MV326 turned on successfully. All LEDs flash SIMATIC MV326 connected to host Wireless symbol 2x short successfully. flashes 1x normal... -
Page 22: Problems And Error Correction
Use the corresponding configuration code on the transfers the data, but not to reader to set the correct communication mode. You can the host. find the configuration codes in the "SIMATIC MV326 Configuration Guide". Note USB keyboard is the most frequently used mode. -
Page 23: Identify Reader
(by default for 30 seconds). You stop the beeping by pressing the Page button again or any other button on the reader. When no reader is connected, the Page LED on the charging station flashes three times quickly. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 24 Alarm, error and system messages 5.3 Identify reader SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 25: Maintenance And Service
• Wipes soaked in alcohol • Clorox® disinfecting wipes • Clorox® bleach solution (10% bleach, 90% tap water) • Medical DiAirKem • Sani-Cloth® HB, Super Sani-Cloth® germicidal, Sani-Cloth® Plus germicidal disposable wipes • Virex® II disinfectant cleaner SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 26 Maintenance and service SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 27: Technical Data
Technical data 6GF3326-0HT01 Product type designation SIMATIC MV326 Bluetooth modem USB 2.0 (generic HID, HID keyboard) Communications interfaces Bluetooth 5 Low Energy (Class II) Operating modes Field selection Near field or wide field Time stamp Interval logging Decoding capability 1D codes... - Page 28 131 x 53 x 135 mm • Charging station • 79 x 79 x 49 mm Weight • Optical handheld reader • 177 g (including battery) • Charging station with integrated Bluetooth • 97 g modem SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
- Page 29 10 mil Data Matrix 20.8 mil Data Matrix 1 mil = 0.0254 mm The ideal read distance is about 100 mm. Depending on the code type and code size, smaller or larger distances are possible. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
- Page 30 Technical data SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 31: Dimension Drawings
Dimension drawings SIMATIC dimension drawing SIMATIC MV326 charging station dimension drawing SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 32 Dimension drawings SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 33: Ordering Data
Article number SIMATIC MV326 6GF3326-0HT01 Optical handheld reader including battery, charging station and USB cable Table 9- 2 SIMATIC MV326 accessories ordering data Article number Battery 6GF3326-0AC07 lithium-ion 1 300 mAh, 50 000 charging cycles Charging station with USB interface 6GF3326-0AC03 Bluetooth wireless interface and USB cable (0.9 m) - Page 34 Ordering data SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 35: Appendix
Keyboard Mapping) than with selection of a specific keyboard language (e.g. US keyboard). SIMATIC MV326 A current list of the codes for configuration of the SIMATIC MV326 optical handheld reader is available at the following link: MV326 Configuration Guide (https://support.industry.siemens.com/cs/ww/en/ps/15161/man) -
Page 36: Specify Character Length To Be Read" Function
With the help of this function, you can specify the code character length to be read by the SIMATIC MV326 optical handheld reader. When you enable this function, the optical handheld reader will only read codes that have exactly the character length you have specified. - Page 37 Disabling the function Follow these steps to disable the function: 1. Scan the device-specific reset code: When the reset code is scanned, the optical handheld reader is reset to the factory settings and restarted. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 38: Certificates & Approvals
19 characters 20 characters 21 characters 22 characters 23 characters 24 characters Certificates & approvals According to the conditions of the guarantee, the product guarantee becomes void if the housing is opened or handled improperly. SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02... - Page 39 Standards The device MV326 (6GF3326-0HT01) is equivalent to the CR2702_01 Specifications devices from CodeCorp. IC: 4492A-2832 (CR2702_01) The device MV326 CHARGING STATION (6GF3326-0AC03) is equivalent to the CRA-A271 device from CodeCorp. IC: 4100A-BT840 (CRA-A271) SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 40: Fcc Information
Appendix A.3 Certificates & approvals A.3.1 FCC information Siemens SIMATIC MV326 (optical handheld reader) FCC ID: HSW2832 (CR2702_01) Siemens SIMATIC MV326 (charging station) FCC ID: X8WBT840 (CRA-A271) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:... -
Page 41: Ic-Fcb Information
Appendix A.3 Certificates & approvals A.3.2 IC-FCB information Siemens SIMATIC MV326 (optical handheld reader) IC: 4492A-2832 (CR2702_01) Siemens SIMATIC MV326 (charging station) IC: 4100A-BT840 (CRA-A271) This Class B digital apparatus complies with Cet appareil numérique de la classe B est Canadian ICES-003. - Page 42 Appendix A.3 Certificates & approvals SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...
-
Page 43: Service & Support
Industry Online Support In addition to the product documentation, you are supported by the comprehensive online information platform of Siemens Industry Online Support at the following Internet address: Link: (https://support.industry.siemens.com/cs/de/en/) Apart from news, you will also find the following there: •... - Page 44 Service & Support SIMATIC MV326 Operating Instructions, 08/2021, C79000-G8976-C644-02...