Preface - Siemens SIMATIC MV500 Operating Instructions Manual

Preface

Validity of these operating instructions
This document contains information on the products listed below.
Table 1
Device/license
SIMATIC MV540 S
SIMATIC MV540 H
SIMATIC MV550 S
SIMATIC MV550 H
SIMATIC MV560 U
SIMATIC MV560 X
The optical readers of the SIMATIC MV500 series can be used for optical identification
applications in manufacturing and logistics. Typical applications are product tracking and
production control.
These operating instructions apply to firmware V3.0.
Product designation
In the remainder of this document, the term "optical reader" is also used instead of the full
product name, "SIMATIC MV540".
Purpose of the operating instructions
These operating instructions contain all the information you need for commissioning and
using the device.
They are intended for persons installing the device mechanically, connecting it electrically,
assigning the parameters and commissioning it, as well as for service and maintenance
engineers.
Note
The operating instructions contain all the important information about the device
Read the operating instructions before starting to work with this device. The operating
instructions contain all the important information about the device.
Noting and acting on this information
• Ensures that the device functions correctly
• Saves you service costs.
SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05
Valid for devices/licenses with the following article numbers
Article number
6GF3540-0CD10
6GF3540-0GE10
6GF3550-0CD10
6GF3550-0GE10
6GF3560-0LE10
6GF3560-0HE10
3