8
Operation
8.1
Button assignment
4
Fig. 12:
Button assignment for operation / setting
Pos.
Designation
[1]
Up
[2]
OK
[3]
Down
[3]
Back
Table 1: Button assignment for operation
Product manual 2CKA001473B5267
1
2
OK
3
Function
Standard operating modes "AUTO", "OFF", "ECO" and "Comfort"
■
– Temperature setpoint can be adjusted
Programming mode
■
– Mode selection
Programming mode (displayed values can be adjusted)
■
– Short press: Change of first digit in single steps
– Longer press >1 second: Stepwise change of the first digit with
a frequency of 5 Hz until 5 or 0 is reached. Then the step width
is increased to 5
With the OK button the value of a flashing display is confirmed
■
and next parameter is displayed.
Programming must then be confirmed.
■
At a pressure in standard mode > 0.6 seconds
■
– The selection of standard modes "AUTO", "OFF", "ECO" and
"Comfort" opens and the mode can be adjusted.
– Selection with buttons Λ V and confirmation with OK.
At a pressure of < 0.6 seconds in standard mode the switching
■
times for the current day will be displayed.
Function identical with Up [1]
■
Change from standard modes "AUTO", "OFF", "ECO" and
■
"Comfort" to programming mode and back.
In addition, this button can be used to go one level back in the
■
menu.
Operation
│23