Busch-Jaeger 1098 U-102 Product Manual page 17

4. Mount the flush-mounted insert.
Fig. 6: Mounting the flush-mounted insert
5. Mount the attachment together with the cover frame onto the flush-mounted insert.
– Ensure that the connector is not jammed on the rear side.
– If mounting is difficult, check whether a burr has formed at the lock-in openings of the
flush-mounted insert and remove it.
– The device is now mounted.
Fig. 7: Mounting the attachment
Product manual 2CKA001473B5267
Connection, installation / mounting
│17