Table of Contents
Advertisement
7
Update
A firmware update is carried out via the Web-based user interface of the System Access Point.
8
Operation
Operation is carried out by pressing the individual rockers. Their function is fixed via the
assigned application or its pre-programming and its parameter settings.
Extensive applications are available for the rockers (control buttons).
Note
The scope of delivery contains only the electronic insert. It must
still be completed with a suitable rocker and a
cover fame.
Additional information about the switch ranges is available in the
electronic catalogue (www.busch-jaeger-catalogue.com).
9
Maintenance
The device is maintenance-free. In case of damage, e.g. during transport or storage), do not
perform repairs. Once the device is opened, the warranty is void.
Access to the device must be guaranteed for operation, testing, inspection, maintenance and
repairs (according to DIN VDE 0100-520).
9.1
Cleaning
C aution! - R is k of damaging the devic e!
■
■
Clean dirty devices with a soft dry cloth.
–
If this is insufficient, the cloth can be moistened slightly with a soap solution.
Product manual 2CKA001473B9185
When spraying on cleaning agents, these can enter the device through
crevices.
–
Do not spray cleaning agents directly onto the device.
Aggressive cleaning agents can damage the surface of the device.
–
Never use caustic agents, abrasive agents or solvents.
Update
Cleaning
│33
Advertisement
Table of Contents
