Table of Contents
Advertisement
7.2
Factory settings
Notice
The floor controller measures the temperature of the concrete in the floor. The
temperature of the floor covering is usually about 5°C below the temperature of
the concrete.
■
Switching times
Comfort
ECO
Temperature settings
Comfort
ECO
First switching times when programming changes to 4 events (block function)
Comfort
ECO
-- : -- : This switching time is not active, but can be activated.
Expert settings - Options
Events schedule of weekly program
Event schedule of number of events
Adaptive function
Button lock
Display illumination
■
Automatic S/W change
Language
External input
Product manual 2CKA001473B5267
It is recommended that the temperature limit of the floor controller is set as
low as possible to prevent damage to the floor. Since different material have
different characteristics, the recommendations of the manufacturer should be
observed.
Mon - Fri 7 a.m.
Mon - Fri 10 p.m.
Sat - Sun 10 p.m.
23.0°C
19.0°C
Mon - Fri 7 a.m.
Sat - Sun 8 a.m.
Mon - Fri 9 a.m.
Sat - Sun -- : -- 10 p.m.
Sat - Sun 8 a.m.
4 p.m.
-- : --
10 p.m.
Block function
2 events per block
Yes
No
Automatically
Yes
German
OFF (with frost protection)
Commissioning
│21
Advertisement
Table of Contents
