Table of Contents
Advertisement
6.2
Mounting / dismantling
Danger - Electric voltage!
Risk of death and fire due to electric voltage of 100 to 240 V.
–
–
Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
–
–
In Germany the flush-mounted insert must only be installed in flush-mounted boxes according to
DIN 49073-1, Part 1, or suitable surface-mounted housings.
Different installation standards apply in other countries. These are to be taken into account
when used in connection with a different support ring and flush-mounted box.
To mount the device, proceed as follows:
1. Pull the attachment off.
–
If the device is already mounted or assembled, pull off the attachment from the flush-
mounted insert with the aid of the frame.
Fig. 3:
Wall mounting: pulling off the attachment
2. If the device is in its as-delivered state, pull the attachment off the flush-mounted insert with
your hands.
–
Pull the attachment off only with your hands. Do not lever it off with a screwdriver or a
similar hard object. This will damage the device.
Product manual 2CKA001473B5267
Work on the 100 - 240 V supply system may only be performed by
authorised and qualified electricians.
Disconnect the mains voltage prior to mounting and dismantling.
Pull the attachment off only with your hands.
Do not lever parts off with screwdrivers or similar hard objects.
Connection, installation / mounting
│15
Advertisement
Table of Contents
