Table of Contents
Advertisement
8.5
Error messages
8.5.1
Floor sensor is not connected
Fig. 27:
No floor controller connected
For the use of applications "Floor control" and "Room control / floor limitation" a floor sensor
must be connected.
If there is no floor sensor connected and one of the applications is activated, the message
"Sensor floor error" will be displayed instead of the main menu.
The buttons have no function.
■
The controller carries out a PWM heating control with a 30% ON period.
■
To reset the error message, switch to the expert settings and select the application "Room
control" (see chapter 8.4.3 "Expert settings ‒ Special functions" on page 34).
Product manual 2CKA001473B5267
Operation
│36
Advertisement
Table of Contents
