8.2.2
AUTO
Fig. 14:
Operating mode: AUTO
In AUTO mode the time program is active.
In the time program the temperature is controlled to the comfort temperature and the reduced
ECO temperature according to the set times.
To set the time values: see chapter 8.3.3 "Setting switching times" on page 29.
■
To set the temperature values: see chapter 8.3.4 "Comfort/ECO: Set temperature" on page
■
31.
To set 2 or 4 events per day: see chapter 8.4.2 "Expert settings - Options" on page 33.
■
–
This setting is located in the "Expert settings" menu. If you are not sure, consult an
expert to make the settings.
The set value can be adjusted with the Up / Down buttons and remains valid until the next
programmed switching time is reached.
If the set value is adjusted manually, "Manual" is shown in the display.
■
Fig. 15:
Operating mode: AUTO with manually adjusted setpoint
Product manual 2CKA001473B5267
Operation
│25