Maintenance - Bornack LORY HOLD LOH01 User Manual

MAINTENANCE

• If necessary, apply a small amount of
oil on the joints so that the moving
parts of the karabiner and other devic-
es run smoothly. If possible, use preci-
sion mechanics oil. Ensure that the oil
does not come into contact with textile
PPE components.
• Maintenance may only be carried out
by a qualified expert in compliance
with DGUV Principle 312-906. All in-
structions in this User Manual must be
strictly observed.
• Protective equipment that is clean and
well looked after will last longer!
OTHER
CLEANING
• Dry damp personal protective equip-
ment in the air, not on artificial heat
sources. Dry metal components with
cloths.
• Clean soiled textile components (e.g.
arrester harnesses and ropes) with
lukewarm water and a little detergent
for delicates. Then rinse carefully and
allow to dry in the air. Other cleaning
agents are not allowed!
• If disinfection is necessary, please con-
tact the e-mail hotline:
info@bornack.de
• If the personal protective equipment
comes into contact with salt-water,
keep it wet until it can be rinsed with
plenty of distilled water.
• Use compressed air to blow on the unit
if necessary.
18 | 19