Marker Splicing Process - Scantech iReal 2S User Manual

iReal 2s Handheld Color 3D Scanner User Manual

6.1.3 Marker splicing process

(1) Click pre-scan,we can grasp the optimal distance for scanning and the
brightness of the camera. Click the button on the scanner to pause the pre-scan.
(2) When scanning is started, the software scans the markers by default. After the
scanning is completed, click" End Scan" to complete the scanning of the markers
(Figure6- 3).
(3)Click " " again or press the scanner start button to start object scanning.
After scanning is complete, click "
Figure6- 3 Marker scanning completed
" to finish scanning (Figure6- 4).
Figure6- 4 Scan completed
31