Quick Start Process; Calibration - Scantech iReal 2S User Manual

iReal 2s Handheld Color 3D Scanner User Manual

4 Quick start process

This chapter mainly describes the calibration and basic scanning operation process
of the iReal 2S series.
N o t i c e

4.1 Calibration

For the first use of the scanner, you need to calibrate the device before scanning,
the purpose is to calibrate the camera parameters. The following situations require
calibration of the equipment:
①Use the equipment for the first time;
②The equipment has not been used for a long time;
③The equipment is shaken / transported;
④The amount of scanning data in a single frame is small;
⑤The data cannot be spliced.
The device is successfully connected, you need to wait for the computer
to successfully recognize the camera driver (3-5 seconds), and then open
the software for calibration / basic scanning operations.
13