Scantech iReal 2S User Manual page 23

iReal 2s Handheld Color 3D Scanner User Manual
(3)After the scan, click"
(4)Finish scan，click"
到引用源。）.
(5)Click "Disconnected item" to find and delete the point cloud far away from
the point group. If the data stitching error is caused by too little single frame data, you
can click the Delete overlay "
"to finish the can，scan result（Figure4- 4）.
Figure4- 4 Finish scan
"isolated point to remove the extra points（错误!未找
Figure4- 5 Delete isolated points
"button to delete it.
16