Scantech iReal 2S User Manual page 24

iReal 2s Handheld Color 3D Scanner User Manual
(6)Click" "to wrap point cloud to triangular mesh surface, edit triangular mesh
surface,delete and adjust the brightness and contrast.In general, choose "closed mode"
to fill the holes, and then click "apply"（Figure4- 6）.
Figure4- 6 Fill hole mode
(7)After "Fill hole mode", pops up"mesh optimization"window, can choose the
level of smoothing (generally choose "High Detail") according to the requirements for
the effect of the scanned object, and click "Apply" (Figure4- 7).
Figure4- 7 Mesh optimization
17