Table of Contents
Advertisement
2.4
Hardware Installation
2.4.1
Memory Installation
1.
Remove Mini-PCIe cover, HDD cover by loosening the 5 fixing screws.
2.
Remove the heatsink by loosening the 4 fixing screws on front and rear panels,
and 2 fixing screws inside the chassis.
3.
Insert the memory into memory socket.
4.
Reverse the above-mentioned steps to assemble the system.
2.4.2
HDD Installation
1.
Assemble the 2.5-inch SATA HDD on HDD bracket with 4 HDD screws.
2.
Install the HDD module into the system.
3.
Assemble back the HDD cover with the screws.
ARK-DS520 User Manual
Figure 2.12 Memory Installation
Figure 2.13 HDD Installation
12
Advertisement
Table of Contents
