First Step; Second Step; Final Step - Yamaha XT225-C Service Manual

THROTTLE CABLE FREE PLAY ADJUSTMENT
2
1
4
3
8
7
3. Adjust:
*********************************
Adjustment steps:
6
NOTE:
When accelerating, throttle cable #1 1 is
5
pulled and throttle cable #2 2 is pushed.

First step:

Loosen the locknut 3 on throttle cable #2.
Turn the adjuster 4 in or out until all slack is
removed from throttle cable #2.

Second step:

Loosen the locknut 5 on throttle cable #1.
Turn the adjuster 6 in or out until the speci-
fied free play is obtained.
Turning in
Turning out
Tighten the locknut.
NOTE:
If the free play can not be adjusted here, adjust
it at the throttle grip side of the cable.

Final step:

Loosen the locknut 7.
Turn the adjuster 8 in or out until the speci-
fied free play is obtained.
Turning in
Turning out
Tighten the locknut.
After adjusting the free play, turn the han-
dlebar to right and left, and make sure that
the engine idling does not run faster.
Install the fuel tank, seat and the side covers.
*********************************
- 22 -
CHK
Throttle cable free play
Free play is increased.
Free play is decreased.
Free play is increased.
Free play is decreased.
WARNING
Bolts (fuel tank, air scoops, seat
and side cover):
7 Nm (0.7 m•kg, 5.1 ft•lb)
ADJ