Yamaha XT225-C Service Manual page 412

È Pass the handlebar switch lead (right), front brake
switch lead, clutch switch lead, starter cable,
throttle cable and clutch cable through the guide.
É Fasten the front brake switch lead, clutch switch
lead and handlebar switch lead (right) with a
plastic locking tie.
Ê Fasten the wireharness, throttle cable, clutch
cable and starter cable with a plastic clamp.
Ë Fasten the wireharness with a plastic locking tie.
CABLE ROUTING
Ì Fasten the flasher light lead (left) and sidestand
switch lead with a plastic locking tie.
Í Fasten the flasher light lead (left) with a plastic
locking tie.
Î Fasten the sidestand switch lead with a metal
clamp.
Ï Fasten the sidestand switch lead with a plastic
locking tie.
Ð Guide (engine side)
- 16 -
SPEC