Yamaha XT225-C Service Manual page 413

Ñ Fasten the handlebar switch lead, clutch switch
lead, front brake switch lead, starter cable,
clutch cable and throttle cable with a plastic lock-
ing tie.
Ò Align the portion of the front brake hose marked
with white paint with the clamp.
Ó Clamp the front brake hose.
Ô Fasten the front brake hose and speedometer
cable with a plastic locking tie.
CABLE ROUTING
Õ Fasten the flywheel magneto lead, pulser coil
lead, battery lead (–), starter motor lead and rear
brake switch leads with a plastic locking tie.
Ö Fasten the flywheel magneto lead, pulser coil
lead, battery lead (–) and starter motor lead with
a metal clamp.
× To engine.
- 17 -
SPEC