Cleaning The Neorest; Thorough Cleaning; Cleaning The Main Unit And Seat - Toto NEOREST LE Instruction Manual

Thorough cleaning

Cleaning the main unit and seat

The seat can be detached, allowing thorough cleaning.
Detaching the seat
1
1
Disconnect the mains plug.
For your safety, disconnect the mains plug before
removing the unit. In addition, avoid splashing water on
the disconnected mains plug.
The mains plug is behind the right cover panel.
Removing the cover panel See page 16.
2
2
Detach the seat.
Raise the seat and pull straight up
as shown in the illustration.
Detach the seat by grasping it with both hands and
lifting.
Do not pull up at an angle or use unnecessary
force.
(Doing so could cause damage.)
Be certain to Be certain to
pull straight up pull straight up
3
3
Place the detached seat on top of
the toilet.
The length of the seat cord is about 8 cm.
Do not pull it with excessive force.
(Doing so could break the cord.)
4
4
Clean the main unit and seat.

"Cleaning the NEOREST"

See page 32.
GB
34
Seat Seat
Seat cord Seat cord
About About
8 cm 8 cm
Reattaching the seat
1
1
Con rm that the seat pin is oriented vertically.
If it is not, use pliers or a similar tool to orient it vertically.
Con rm that the seat pin is
inserted completely with a vertical
2
2
Reattach the seat.
With the seat raised, push it onto the seat pin as shown in the
illustration.
Attach the seat by grasping it with both hands.
Do not push the seat in diagonally or with
excessive force.
Make sure the seat cord is not twisted when you
reattach the seat and lid.
Be certain that Be certain that
the seat and the seat and
pin are aligned pin are aligned
when pushing. when pushing.
3
3
Reconnect the mains plug.
Attaching the cover panel See page 16.
The toilet ushing starts automatically.
orientation.
Seat pin
GB
35