Download Print this page

Toto NEOREST LE Instruction Manual page 9

Hide thumbs Also See for NEOREST LE:

Advertisement

Available languages

Available languages

Put batteries in the remote control
1
1
Remove the remote control from the remote control holder.
Grasp the sides of the remote control with both hands and lift straight up.
2
2
Open the battery cover on the back of the remote control and properly
insert two AA batteries.
3
3
Close the battery cover.
4
4
Reattach the remote control to the remote control holder.
About the batteries
Please use alkaline batteries.
Observe the following precautions to keep batteries from splitting or leaking.
When replacing them, use two new batteries of the same brand.
Remove the batteries when not using the remote control for a long time.
Do not use rechargeable batteries.
When to change the batteries
The low battery warning indicator on the remote control blinks when the batteries are running out of power. Put in new
batteries as soon as possible.
Depending on the size of the room, the materials and forms of walls, oors and other elements, transmission might
stop working even before the low battery warning indicator starts blinking. Insert new batteries if this occurs.
GB
14
Remote control holder
Remote control holder
Two AA batteries
Two AA batteries
Close
Close
Open
Open
Battery cover
Battery cover
Check here
Remote control display
When the batteries are inserted properly, the display
section on the back of the remote control will appear
as in this illustration after all indicators have lit.
When xing the remote control to prevent theft
Loosen the locking attachment screws, and detach the remote control. Tighten the screws thoroughly when replacing
them to x the attachments in place.
Use a Phillips head screwdriver with a ne head (No.1 bit size or precision screwdriver).
When replacing the screws, after they are tight do not try to tighten them more. Doing so could damage the remote
control holder or other parts.
1
1
Loosen the locking attachments (one left, one right) using a Phillips
head screwdriver.
Locking attachments (one left, one right)
2
2
Remove the remote control from the
remote control holder.
Side view
Loosen
Loosen
Phillips head screwdriver
Phillips head screwdriver
Screw
Screw
Locking attachments
Locking attachments
(one left, one right)
(one left, one right)
Wall
Wall
Remote control
Remote control
holder
holder
Remote control
Remote control
Remote control
Remote control
Remove
Remove
Remote control holder
Remote control holder
Wall
Wall
GB
15

Advertisement

loading

This manual is also suitable for:

Neorest seCw997dfCw998df