Preparation; Name Of Each Part Of Projector - Canon LV-7575 User Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
PROJECTION LENS
CAUTION
Do not turn on the projector
with the lens cap attached.
High temperature from light
beam may damage the lens
cap and result in fire hazard.
LENS CAP
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
● Do not put a flammable object near this
vent.
● Keep the rear grills at least 1 m (3.3') away
from any object, especially from heat-
sensitive objects.
● Do not touch this area, especially screws
and metallic parts. This area will become hot
when the projector is in use.
This projector detects internal temperature
and automatically controls operating power
of the cooling fans.
BOTTOM OF CABINET
SPEAKERS
POWER CORD TERMINALS
CONNECTOR AND CONNECTORS
LAMP COVER
When attaching the Network Imager
(optional) to the projector, remove the these
parts. Refer to the user's manual of the
optional Network Imager.
AIR INTAKE VENTS
This projector is equipped with cooling fans for protecting from
overheating. Pay attention to the following matters to ensure
proper ventilation and avoid a possible risk of fire and malfunction.
● Do not cover the vent slots.
● Keep this side clear of any objects. Obstructions may block
cooling the air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
TOP CONTROLS
AND INDICATORS
Kensington Security Slot
This slot is for a Kensington
lock used to deter theft of
the projector. For more
information, visit
http:www.kensington.com.
*Kensington is a registered trademark of
ACCO Brands Corporation.
AIR INTAKE
INFRARED
REMOTE RECEIVER
INFRARED
REMOTE RECEIVER
VENT
CARRYING
HANDLE
7