Picture Screen Adjustment; Picture Screen Select - Canon LV-7575 User Manual

COMPUTER INPUT
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the SCREEN Menu icon.
2
Press the POINT UP/DOWN buttons and move the red
frame pointer to the desired function and then press
the OK button.
Normal
Provides the image to fit the screen size.
True
Provides image in its original size.
Wide
Provides the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be used to
provide the squeezed video signal at 16:9.
Full
Provides the full screen image.
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
disappears and "D. Zoom +" appears. Press the OK button to
expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT
buttons to pan the image. The Panning function can work only
when the image is larger than the screen size.
The projected image can be also expanded by pressing the
D.ZOOM ▲ button on the remote control unit.
Digital zoom –
When the Digital zoom – is selected, the On-Screen Menu
disappears and "D. Zoom –" appears. Press the OK button to
compress the image size.
The projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control unit.
To cancel the Digital Zoom +/– mode, press any button except
D.ZOOM ▲/▼, OK, POINT, and LASER buttons.
30

PICTURE SCREEN ADJUSTMENT

PICTURE SCREEN SELECT

SCREEN MENU
Move the red frame pointer to a function
and press the OK button.
NOTE:
• True, Full, and Digital zoom +/– cannot be operated when
"480i," "575i," "480p," or "575p is selected on the PC
SYSTEM Menu. (p.25)
• The Screen Menu cannot be operated when "720p (HDTV),"
"1035i (HDTV)," or "1080i (HDTV)" is selected on the PC
SYSTEM Menu. (p.25)
• This projector cannot display any resolution higher than 1600
x 1200. If your computer's screen resolution is higher than
1600 x 1200, lower the resolution before connecting the
projector.
• The image data other than XGA (1024 x 768) is modified to
fit the screen size in initial mode.
• The Panning function may not operate properly if the
computer system prepared on the PC ADJUST Menu is used.
SCREEN Menu icon