BASIC OPERATION
Press the ZOOM button on the top control or ZOOM ▲/▼
1
buttons on the remote control unit. "Zoom" appears on
the screen.
Press the ZOOM ▲ button or POINT UP button to make
2
the image larger, and press the ZOOM ▼ button or
POINT DOWN button to make the image smaller.
1
Press the FOCUS button on the top control or FOCUS
▲/▼ buttons on the remote control unit. "Focus" appears
on the screen.
Adjust the focus of image by pressing the FOCUS ▲/▼
2
buttons or POINT UP/DOWN buttons.
NOTE:
• Focus adjustment may not function properly if the image is corrected by the
Keystone function.
1
Press the LENS SHIFT button on the top control or LENS
SHIFT ▲/▼ buttons on the remote control unit. "Lens
shift" appears on the screen.
Press the POINT UP button or LENS SHIFT ▲ button to
2
move the image up, press the POINT DOWN or LENS
SHIFT ▼ button to move the image down.
If a projected picture has keystone distortion, correct the image with the Keystone function.
1
Press the KEYSTONE button on the remote control unit or
select Keystone in the SETTING Menu. (See page 38.)
The Keystone dialog box appears.
2
Correct keystone distortion by pressing the POINT
UP/DOWN/LEFT/RIGHT buttons. Press the POINT UP
button to reduce the upper part of the image; press the
POINT DOWN button to reduce the lower part. Press the
POINT LEFT button to reduce the left part; press the
POINT RIGHT button to reduce the right part.
Reduce the upper width
with POINT UP button.
22
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
LENS SHIFT ADJUSTMENT
KEYSTONE CORRECTION
Reduce the lower width
with POINT DOWN button.
"Zoom" disappears after 4 seconds.
"Focus" disappears after 4 seconds.
"Lens shift" disappears after 4 seconds.
• Arrows are white when no correction.
• Arrow(s) in the corrected direction turn(s) red.
• Arrow(s) disappear(s) at the maximum correction.
• If you press the KEYSTONE button on the remote
control unit once more while the Keystone dialog
box is being displayed, the Keystone function is
canceled.
• "Keystone" disappears after 10 seconds.
Reduce the left part with
POINT LEFT button.
Reduce the right part with
POINT RIGHT button.