Maintenance; Warning Temp. Indicator - Canon LV-7575 User Manual

APPENDIX
The Warning Temp. indicator blinks red to let you know the internal
temperature of the projector exceeds a normal level. If the temperature
goes up further, the projector will be turned off automatically and the
Ready indicator goes out. (The Warning Temp. indicator continues
blinking.) After the cooling-off period, the Ready indicator lights on again
and the projector can be turned on by pressing the POWER button on the
top control or the remote control unit. When you turn on the projector,
the Warning Temp. indicator goes out.
If the Warning Temp. indicator is still blinking, check the following
matters:
– The ventilation slots of the projector may be blocked. In such a case,
reposition the projector so that the ventilation slots are not obstructed.
– The air filters may be clogged with dust particles. Clean them by
following the section "AIR FILTER CARE AND CLEANING" on the next
page.
– If the WARNING TEMP. indicator remains on after performing above
checks, the cooling fans or internal circuits may be malfunctioning.
Contact the service station.
When both of the Warning Temp. and Ready indicators are blinking:
When the projector detects an internal problem, it shuts down automatically and both the Warning Temp. and
Ready indicators start blinking. In this condition, the projector cannot be turned on even if you press the
POWER button on the top control or remote control unit. If this happens, unplug and reconnect the AC power
cord, and then turn on the projector again to check the operation. If the projector shuts down again or cannot to
be turned on, internal checking and repair is required. Unplug the AC power cord and contact the service
station.
46

MAINTENANCE

WARNING TEMP . INDICATOR
TOP CONTROL
Warning Temp. Ready
Indicator Indicator