PREPARATION
Projection angle can be adjusted up to 10.5 degrees with the
ADJUSTABLE FEET.
1
Lift the front of the projector and pull the FEET LOCK
LATCHES in each side of the projector.
2
Release the FEET LOCK LATCHES to lock the ADJUSTABLE
FEET and rotate the ADJUSTABLE FEET to a proper height,
and tilt.
3
To retract the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
Keystone distortion of the projected image can be corrected
by the Menu Operation. (See pages 22, 38.)
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
10˚
10˚
NO SIDEWAYS
10˚ 10˚
10˚ 10˚
10
ADJUSTABLE FEET
INSTALLING PROJECTOR IN PROPER POSITION
Do not tilt the projector more than 10 degrees from side to side.
Do not put the projector on either side to project an image.
When projecting vertically (up or down), keep the projector's tilt within 10
degrees. Tilting more than 10 degrees in either direction may affect the projector
life.
ADJUSTABLE FEET
FEET LOCK
LATCHES