Canon LV-7575 User Manual page 36

PICTURE IMAGE
COLOR SELECTION MODE (continued)
COLOR M.
Return to the COLOR MANAGEMENT POINTER. (If you
press the MENU button on the top control or the remote
control unit, it returns to the COLOR MANAGEMENT
POINTER and you will need to reselect and readjust the
color.)
MENU
Return to the IMAGE ADJUST Menu. But any settings that
have been changed will not be stored. To store the changed
settings, be sure to select "LIST" and go to the COLOR
MANAGEMENT LIST.
4 In the COLOR MANAGEMENT LIST, the adjusted color
data are check marked. You can decide whether or not
to apply the adjusted color data in the list to the
projected image (see below).
LIST MODE
Clear the check mark if you do not want to apply the adjusted
color data; select the check mark and then press the OK
button. The check make disappears.
COLOR PALETTE
Return to the COLOR SELECTION mode so that you can
readjust the setting for the color in that line. (This option is
not available if the check mark is cleared.)
DEL
Select the DEL box if you want to delete the adjusted data.
Press the OK button and a confirmation box appears and then
select [Yes]
ALL DEL
Delete all the data in the list. Press the OK button and a
confirmation box appears and then select [Yes].
MENU
The same function as stated above.
COLOR M.
The same function as stated above.
Auto picture control
Press the POINT LEFT/RIGHT buttons to select the desired Auto
picture control position. The part where the image is dark is
emphasized. It is emphasized more strongly in order of Off, L1, L2.
Off . . . . Auto picture control OFF position.
L1 . . . . . Auto picture control LEVEL 1 position.
L2 . . . . . Auto picture control LEVEL 2 position.
Color temp.
Press either the POINT LEFT/RIGHT buttons to select the desired
Color temp. level (XLow, Low, Mid, or High).
36
COLOR SELECTION MODE
Level and phase Gamma
adjustment palette. adjustment palette.
LIST COLOR M.
LIST MODE
ALL DEL MENU
NOTE:
If you press the COLOR M. button on the remote
control unit, the display returns to the normal
projection screen, but any settings that have been
changed will not be stored. To store the changed
settings, be sure to select "MENU" to return to
the IMAGE ADJUST Menu and store the settings.
MENU
COLOR PALETTE
DEL
COLOR M.