Top Controls And Indicators - Canon LV-7575 User Manual

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
LAMP MODE INDICATOR
Lights when the Lamp
mode is set to "Silent"
mode. (p.41)
LAMP REPLACE INDICATOR
Turns to orange when the
projection lamp reaches its
end of life.
Blinks orange when the lamp
cannot light up. (pp.48, 56–57)
MENU BUTTON
Used to open or
close the On-Screen
Menu. (p.18, 19)
LAMP MODE BUTTON
Used to select a Lamp
mode. (p.41)
LENS SHIFT BUTTON
Used to select the Lens
Shift function. (p.22)
ZOOM BUTTON
Used to adjust zoom.
(p.22)
WARNING TEMP. INDICATOR
Blinks red when the internal
temperature of the projector
is too high. (pp.46, 56–57)
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust a
value in On-Screen Menu. They are
also used to pan the image in the
DIGITAL ZOOM +/– mode. (p.30)
The POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
(p.23)
BEFORE OPERATION
READY INDICATOR
Lights green when the
projector is ready to be
turned on. And it blinks
green in the Power
Becomes dim when the
management mode.
projector is turned on.
(pp.40, 46, 56–57)
And it becomes bright
when the projector is in
stand-by mode.
(pp.20–21, 56–57)
POWER BUTTON
Used to turn the
projector on or off.
(pp.20–21)
INPUT BUTTON
Used to select an
input source.
(pp.24, 31)
AUTO PC ADJ. BUTTON
Used to operate the Auto
PC Adjustment function.
(p.26)
Used to execute
the selected item.
It is also used to
expand/compress
the image in the
FOCUS BUTTON
DIGITAL
Used to adjust focus.
mode. (p.30)
(p.22)
LAMP INDICATOR
OK BUTTON
ZOOM
17