Preparation; Name Of Each Part Of Projector - Canon LV-S1 Owner's Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT
PROJECTION LENS
FOCUS RING
ZOOM LEVER
BACK
TOP CONTROLS
AND INDICATORS
BOTTOM
AIR INTAKE VENTS
AND AIR FILTERS
LAMP COVER
INFRARED
REMOTE RECEIVER
LENS COVER
Air blown from Exhaust Vents is hot. When using or
installing projector, following precautions should be taken.
This projector detects internal temperature and
automatically controls operating power of Cooling Fans.
SPEAKER
EXHAUST VENTS
HOT AIR EXHAUSTED !
Do not put any flammable object near these vents.
Keep front grills at least 3'(1m) away from any object,
especially heat-sensitive object.
Do not touch this area, especially screw and metallic part.
This area will become hot while a projector is used.
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
POWER CORD
CONNECTOR
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS
(Back and Bottom)
Do not cover vent slots.
Keep back and bottom clear of any
object. Obstructions may block
cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7