Preparation; Name Of Each Part Of Projector - Canon LV-7555 Owner's Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
PROJECTION LENS
LENS COVER
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing projector, following
precautions should be taken.
G Do not put any flammable object near these
vents.
G Keep rear grills at least 3.3'(1 m) away from
any object, especially heat-sensitive object.
G Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
TOP CONTROLS
AND INDICATORS
SPEAKERS
POWER CORD
CONNECTOR
LAMP COVER
When attached the Network Imager (optional
part) to the projector, remove the these parts.
Refer to the owner's manual in the optional
Network Imager.
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from
overheating. Pay attention to following to ensure proper ventilation
and avoid a possible risk of fire and malfunction.
G Do not cover vent slots.
G Keep side clear of any objects. Obstructions may block cooling
air.
ADJUSTABLE FEET
FEET LOCK LATCHES
INFRARED
REMOTE RECEIVER
TERMINALS
AND CONNECTORS
AND
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7