Warning!
This document is the property of VWR International S.r.l. - Milan - Italy
It may not be duplicated or distributed without the owner's authorisation. Patent Pending
Manufactured by VWR International S.r.l. - Milan, Italy
Safety Information
Please use this device only for the purposes indicated.
The device must be correctly used according to this instructions manual before starting any
operation. Any electrical cables need to be replaced immediately when damaged; never use a
damaged or worn electrical cable.
Always disconnect the charger before:
‒
Repairing or maintenance; these operations must be carried out by qualified staff
‒
Cleaning the unit
Use original spare parts and accessories for any replacement.
Do not use this device in the presence of explosive gas.
Please follow the guidelines below and read this manual in its entirety to ensure safe
operation of the unit.
Be aware that the voltage and frequency of the electrical system are
compatible with the requirements of the battery charger.
Never use a non-OEM charger to charge the air sampler. Use of an improper
harger may damage the unit.
Carefully read this manual before operating your instrument.
References
‒
FDA - 1987 Guideline on Sterile Drug Products produced by Aseptic Process
‒
ACGIH - Guideline for the Assessment of Bioaerosol in the Indoor Environment
‒
ASTM - Draft Protocol - Committee D22.05.06
‒
USP 23-NF 18 8th Supplement 1116 (May 1998) - Microbiological Evaluation of Clean Rooms
and other Controlled Environments
‒
EU Guide for GMP - Manufacture of Sterile Medicinal Products Control of Medicines and
Inspection
‒
CEN/TC 243 Norms for Clean Room Technology
4
vwr.com | Instruction manual