Advertisement
Thank you for purchasing the Diode Dynamics Underglow LED Kit!
Tools Needed: Drill with 3/4" bit, Needle Nose Pliers, Phillips Screwdriver, Flathead
Screwdriver, Socket Wrench Set
1. Locate where to mount the LED strips. Be sure that the surface is clean before
mounting. Mount the LED strips using the 3M adhesive backing. Then use zip ties
to secure the LED strips.
2. Connect the ring terminal from the black wire on the wiring harness
ground or the negative terminal on the battery.
PAGE 1
Universal Underglow LED Kit
Installation Guide
Wiring Harness
(314) 205-3033
3 YEAR
WARRANTY
to a chassis
A
See back for further instructions.
WWW.DIODEDYNAMICS.COM
Advertisement
Table of Contents
Related Manuals for Diode Dynamics DD0442
Summary of Contents for Diode Dynamics DD0442
- Page 1 Universal Underglow LED Kit Installation Guide Thank you for purchasing the Diode Dynamics Underglow LED Kit! Tools Needed: Drill with 3/4” bit, Needle Nose Pliers, Phillips Screwdriver, Flathead Screwdriver, Socket Wrench Set 3 YEAR Wiring Harness WARRANTY 1. Locate where to mount the LED strips. Be sure that the surface is clean before mounting.
- Page 2 Please contact Diode Dynamics should you have any questions about the installation or wiring process, at 314-205-3033 (10a-5p CST) or contact@diodedynamics.com. This installation guide is for the following SKU:...
Need help?
Do you have a question about the DD0442 and is the answer not in the manual?
Questions and answers