Periodic Maintenance Table; 7.1 Disposal Of Exhaust Materials; 7.2 Indications For Special Waste - CAMPAGNOLA Speedy Use And Maintenance Manual

Electric pruning shear
Hide thumbs Also See for Speedy:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
6.5

Periodic maintenance table

Maintenance
Check the screws for proper tightening
Lubricate the blades
General overhaul at an Authorized Service Point

7.1 Disposal of exhaust materials

After having been installed and during use, the machine does not cause any environmental pollution. However,
throughout its working life, some types of residual waste or exhaust materials are being produced in certain
maintenance situations.
There are specific regulations in every Country as for the disposal of these materials and the environment protec-
tion. The Customer is required to be knowledgeable in the Laws in force in his own Country and to operate only
while complying with these regulations, according to the indications in the product technical charts, which may
be obtained from the Manufacturer.
WARNING!
The Laws in force about the disposal of mineral oils must be followed.
WARNING!
More information about the disposal of oils and other substances can be found in the safety chart of the sub-
stances.
The steps employed in the disposal of toxic waste including the collecting, transporting, processing (transfor-
mation for recycling), as well as the deposit and the dumping onto the ground are all usual activities of common
interest and are subject to the following general principles:
a)
Any risks of injuries or dangers for the health and safety of any individual and of the community have
to be avoided.
b)
Compliance with any and all hygienic-sanitary requirement and avoidance of any air, water, ground
and underground pollution have to be guaranteed.
Compliance with efficient and economical principles in order to save and recycle energy and materials shall be
promoted.

7.2 Indications for special waste

Special waste is that deriving from industrial processes as well as from materials of dismantled equipment and
deteriorated and obsolete machineries.
The special (also toxic and harmful) waste producers shall provide for its disposal directly or through qualified,
authorised companies or bodies, or shall deliver them to public service after having made an agreement.
When disposing of special waste, check with the relevant local government authority for any available information
regarding such waste disposal in your region.
WARNING!
Any unauthorised disposal by the owner of a product is followed by the application of the sanctions due to the
regulations in force.
WARNING!
In compliance with the Directive 2012/19/EU on RAEE any bought element/equipment marked with the symbol of
the crossed dustbin means that it has to be collected, at the end of its working life, separately from other waste:
The separate collection of the element/equipment, at the end of its working life, shall be managed by the
Manufacturer. The user shall, therefore, contact the Manufacturer and follow the procedures established
by the Manufacturer himself for the separate collection of an end-of-life equipment. The adequate sepa-
rate collection and the following processing and eco-friendly disposal avoid negative effects on the health
and the environment and allow the recycling of the materials the products are made of. Any unauthorised
disposal, personally carried out by the end-user, would cause the application of sanctions, according to
the local Laws.
Page 28
After 8 work hours
After 240 work hours or at the end of any
X
X
work season
X
Use and maintenance manual – Translation of
original Instruction.: 00, Date 10/10/2019

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ln24.0100

Table of Contents