Problem Solution; Special Maintenance - CAMPAGNOLA Speedy Use And Maintenance Manual

WARNING!
Blade and anvil can be replaced separately. Do not worry about the blade positioning. It will put itself in the right position
after switching on the shear at the end of the replacement.
6.3

Problem solution

Number of short Fault
beeps
1 beep Reduced battery capacity
3 repeated beeps Inefficient blade
4 repeated beeps Interrupted connection to the motor
5 repeated beeps Shorted motor
Continuous sound Safety warning
6.4

Special maintenance

WARNING!
Any special maintenance operation must be carried out at an Authorized Service Point.
AUTHORIZED SERVICE POINT
It is the Service Point authorized by the Manufacturer for repairing the products.
Use and maintenance manual – Translation of
original Instruction.: 00, Date 10/10/2019
Remedy
Check if the battery capacity is low.
Recharge the battery.
Lubricate the blade (see par. 5.2).
Contact an Authorized Service Point.
Contact an Authorized Service Point.
Check whether the operator's body is in contact with
the shear blade.
Page 27