Advertisement
Operation
1.
Turn ignition and radio "ON"
2. Press CD button on radio.
3. Launch smartphone music streaming application
4. Set audio device initial volume to 80% and raise radio volume knob to set
playback level. If distorted, lower audio device volume.
5. Use media button to change tracks, adjust device volume, pause etc.
6. Place test call or ask someone to call. Press Pause/Play to
answer/end call
7. To switch between CD or AUX playback and music stream press media
button Pause/Play
8. If correct operation is confirmed go ahead and reinstall radio.
Notes:
1.
On incoming calls, ring tone also plays through car speakers
2. AUX has playback priority.
3. *Media button does not control aux device or radio functions. Use AUX
device built-in controls for music selection etc.
Frequent ask questions & troubleshooting
Does the A2DIY-JAG97-AUX work in premium systems?
1.
YES;
the A2DIY-JAG97 works in all pre 1998 Jaguar audio systems with a CD
changer controlling radios. CD changer (if present) must be disconnected.
(See our
A2DIY-JAG97CD
to retain CD changer playback).
Your A2DIY-JAG97 and A2DIY-JAG98 both list 1997 XK vehicles, how
2.
can I tell the difference?
Jaguar XK8 audio system changed in late 1997 which means vehicle
produced in the same calendar year will have different audio systems. To
avoid costly returns, we highly recommend checking the "CD" plug in all
1997 XK8:
a. If Ai-NET connector- (See Fig. 20), purchase our A2DIY-JAG98
b. If 8-pin DIN (male plug)- (See Fig. 20), purchase our A2DIY-JAG97
When in doubt check your application prior to ordering.
Can I connect the A2DIY-JAG97 directly to radio?
3.
YES;
This module connects directly to radio.
Fig. 20
Advertisement
