For 1997-06 xk x100 and 1998-03 xj x308 with cd changer (11 pages)
Summary of Contents for Discount Car Stereo A2DIY-STS
Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2DIY-STS QUICK START BLUETOOTH MODULE INSTALLATION GUIDE FOR 2005-11 CADILLCAC STS WITH XM TUNER MODULE Created November 19, 2019 Revised: September 13, 2021...
Fig. 1 2005-11 Cadillac STS owners eager to bring their smartphones and other digital media devices on the road will be pleased with our A2DIY-STS Bluetooth module. Remove 10mm crews securing radio to dash (See Fig. 2) This module works with virtually all Bluetooth phones and sounds great for (1) Mobile conversations, (2) music streaming and more.
Page 3
Fig. 5 Fig. 3 16-pin connector Radio 16-pin connector Connect harness 16-pin plug (See Fig. 4) to radio 16-pin cavity vacated Disconnect 16-pin plug (See Fig. 4) from radio chamber (See Fig 3). in step4 To release plug, pull blue locking tab, press black release tab. (See Fig. Secure installation harness Black wire (ground) to ground or simply 4) and remove plug out radio cavity.
Page 4
Fig. 7 Aux cable Fig.8 Module Install microphone (See Fig. 9) to vehicles visor or headliner using included visor clip (See Fig. 10). Fig. 10 Fig. 9 Visor clip Microphone Carefully route microphone wire down side pillar and behind dash into radio cavity.
Page 5
Insert supplied 3ft. USB male terminal (See Fig. 13) through hole Optional charging port created in step 1 and connect to USB charging port (See Fig. 14) This USB “smart charging” kit is compatible with the “fast charge” feature on recent Apple and Android energy hungry devices.
Fig. 18 Fig. 16 Snap USB head (See Fig. 18) to bracket until flush (See Fig. 19) Flush mounted to dash Tuck and secure any extra wire from moving parts and test operation Bracket Mount (No drilling) Fig. 19 Locate a flat surface at location of choice within 3.2 ft. of module and Tuck and secure any extra wire away from moving parts and test mount USB support bracket (See Fig.
Page 7
Bluetooth media button Pairing: Ensure Bluetooth is enabled on your device (e.g., Smartphone/Tablet etc.) Press and hold pause/play until Blue LED begin flashing Scan smartphone for available devices and select BT009 from list. (Blue LED turns off). Charging: Media button built-in rechargeable 200mAH battery may last up to 10 days. Connect included USB cable to charge charging port at the back.
Module Pairing Operation Pairing varies among devices but basic steps are the same. This process is done Turn ignition and radio “ON” upon initial install and will not have to be repeated. 2. Press “BAND” or “XM” button on radio. 3.