Related Manuals for Discount Car Stereo A2DIY-BKR
Summary of Contents for Discount Car Stereo A2DIY-BKR
- Page 1 Courtesy of:DiscountCarStereo.com A2DIY-BKR Quick Start Installation Guide for Becker Aux Ready Radios Created March1, 2017 Revised: April 7, 2019...
-
Page 2: Installation
Introduction: European vehicle owners want to keep their cars as original possible including the Becker radio and with the A2DIY-BKR kit, these proud owners can now link up their Smartphones. The A2DIY-BKR kit adds Bluetooth Hands-Free and Streaming Audio from any Smartphone or Tablet with A2DP and HF Profile. In addition, a 3.5mm input jack is also available to connect and play non-Bluetooth... - Page 3 Fig. 4 Fig. 4b Audio ISO plug Installation notes for Ferrari Cluster display In order to retain cluster display (see Fig. 4a) you must purchase optional ISO8-HAR T-harness (See Fig. 4b). Vehicles without cluster display do not require T-harness. Fig. 4b Warning! Most Becker radios are coded and will not operate without the code.
- Page 4 9. Consider where to install control button. Keep in mind the control button must be within drivers reach (cable is 6 ft. long). Once you decide on location, simply remove tape backing (See Fig. 7) and adhere to surface Fig. 5 installation harness 7.
- Page 5 OPTIONAL USB CHARGING PORT (For charging, not audio playback) This add on option provides up to 3 Amps charging current. Should you decide to add the USB Kit, we suggest 2 mounting options: A. Flush to dash/panel requires drilling a ¾” hole in the dash B.
-
Page 6: Operation
USB Bracket (No drilling) Operation: Locate a flat surface at location of choice within 3.2 ft. of radio and One important step in this process is enabling AUX function within radio menu. mount USB support bracket (See Fig. 15) to surface using Most Becker radios are pre-programmed to recognize a CD Changer connection adhesive/tape or screws. - Page 7 Radios with ☼ button: (i.e. BE6104) Press the multifunction button located directly under “AUX” on the display to change the present setting from OFF to ON. The Setting is stored automatically. Nav Traffic Radios Turn Radio “ON” 2. Press and hold the ☼ button for about 8 seconds. 3.
- Page 8 Cascade Pro (i.e. BE6112, BE7941) Becker DTM /High speed (i.e. BE-7892, BE7910) To activate the External Device mode Press the Sound button for more than 2 seconds Turn radio ON. Press multifunction button “AUX” Press the information button Select Aux Mode on Turn the rotary control/push (OK) button counterclockwise until The setting is stored automatically System Settings appears at the top right of the display...
-
Page 9: Optional Remote Control
Pairing multiple devices The A2DIY-BKR will pair to only one device at a time. To pair a second device, you must first un-pair current device (press/hold control button for more than 2 seconds and listen for tone) or simply go to current device setting and set Bluetooth to OFF. -
Page 10: Remote Control Operation
It is also possible to switch to AUX by un-pairing Bluetooth device Bluetooth Comparison Chart Feature BLU-BKR A2D-BKR BT45-BKR A2DIY-BKR BKR-HF CD Changer Retention × 3.5mm AUX input ✓ ✓... -
Page 11: Frequent Asked Questions
Email support@discountcarstereo.com © 1995-Apr-19 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.