Advertisement
:
Button Operation
Once paired with smartphone/Tablet, users may perform the following functions
on iOS devices with Bluetooth 3.0 and later and Android 4.0 or later.
These functions do not apply to the Jaguar radio.
Bluetooth module pairing and connection
This process must be carried out upon initial install after which the A2DIY-JAG97
will automatically reconnect with paired phone.
Go to smartphone settings and enable Bluetooth
1.
Smartphone will automatically begin searching for devices.
2.
Select Bluetooth name below, tap "Connect"
3.
Note: Supports multiple phone pairings but connects to one phone at a time.
If for some reason phone fails to pair, ensure no other has paired to module in
such case you must unpair that device in other to pair another.
:
Warning
Caller ID and text are not shown on radio screen. Operate
Bluetooth device via wireless remote control, VR (voice recognition) or deice
built-in controls. Radio buttons can be used to adjust playback level.
Fig. 19
Advertisement
