Table of Contents
Advertisement
OPERATION
General Information
FIG. 5: When parking, park the machine on a solid level
surface and lower the header to the ground. Put all
controls in neutral and apply the parking brake. Stop the
engine and take the key with you.
m
WARNING: Do not leave the machine
unattended with the header raised. Lower
the header fully before leaving the machine.
A sudden loss of hydraulic pressure can
cause the header to drop without warning.
Make sure the machine is in the proper operating
condition according to the Operator Manual.
Always operate the machine with the control console
turned on.
Do not dismount from moving machinery.
Stay off slopes too steep for operation.
Be aware of the size of the machine and have enough
space available to allow for operation.
FIG. 6: Use extra care and reduce speed when
operating on hillsides or near ditches or embankments
especially with a full grain tank to avoid rollover. Travel
speed must be such that complete control and machine
stability is maintained at all times. Shift to a lower gear
before descending a steep hill.
Regulate ground speed to field conditions, and maintain
control at all times.
Do not dismount from moving machinery.
FIG. 7: Avoid contact with electrical power lines. Always
put the grain tank unloader tube in the transport position
and lower radio aerial before moving combine near
electrical wires. Contact with electrical power lines can
cause electrical shock, resulting in very serious injury or
death.
700747652 B Rev.
FIG. 5
FIG. 6
FIG. 7
SAFETY
D-7084
Wc1937a
Wc1937
A-7
Advertisement
Table of Contents
