System Configuration Screen Options - Dell Latitude 7380 Owner's Manual

Option Description
UEFI boot path
These options control whether or not the system will prompt the user to enter the Admin password (if
security
set) when booting a UEFI boot path from F12 boot menu:
● Always, except internal HDD (default)
● Always
● Never
Date/Time Allows you to change the date and time.

System Configuration screen options

Option Description
Integrated NIC This option controls the on-board LAN controller.
● Disabled - The internal LAN in off and not visible to the operating system.
● Enabled - The internal LAN is enabled.
● Enabled w/PXE -The internal LAN is enabled with PXE boot (default).
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI
● RAID On: This option is enabled by default.
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA- 2
● M.2 PCI-e SSD-0
SMART This field controls whether hard drive errors for integrated drives are reported during system startup. This
Reporting technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
● Enable SMART Reporting
USBConfiguratio
This is an optional feature.
n
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to
boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
● Enable USB Boot Support (by default enable)
● Enable External USB Port (by default enable)
Dell Type-C dock Allows you to enable option- Always Allow Dell Docks.
configuration
● When set to enabled, allows connection to the Dell WD and TB family of docks (Type-C docks)
● When set to disabled, the docks will be controlled via the USB and Thunderbolt Adapter configuration
Thunderbolt
Adapter
configuration:
USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external
devices using the stored system battery power through the USB PowerShare port. By default, the
Enable USB PowerShare is disabled.
Audio This field enables or disables the integrated audio controller. By default, the Enable Audio option is
selected. The options are:
● Enable Microphone (by default enabled)
● Enable Internal Speaker (by default enabled)
independent of USB and Thunderbolt Adapter configuration settings.
settings.
System setup 63