Speaker; Removing Speaker Module - Dell Latitude 7380 Owner's Manual

Speaker

Removing speaker module

1. Follow the procedure in
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. To release the speaker module:
a. Push to disconnect the speaker cable from the connector on the system board [1].
NOTE: Ensure to unroute the speaker cable from the routing clip.
NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in
breakage.
b. Un-route the speaker cable from the routing clips [2].
c. Remove the tape that secures the speaker cables to the touchpad board [3].
5. To remove the speaker module:
a. Remove the M2.0x3.0 screws (4) that secure the speaker module to the computer [1].
b. Remove the M2.0x3.0 screws that secure the speaker module to the computer [1].
NOTE: Refer the
c. Lift the speaker module from the computer .
NOTE: Ensure to un-route the speaker cable from the routing clips.
20 Disassembly and reassembly
Before working inside your
speaker screw list
computer.