Installing WLAN card
1. Insert the WLAN card into the connector on the system board.
2. Connect the WLAN cables to the connectors on the WLAN card.
3. Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the computer.
4. Connect the battery cable to the connector on the system board.
5. Install the
base cover.base
6. Follow the procedure in
Memory modules
Removing memory module
1. Follow the procedure in
2. Remove the
base cover.base
3. Disconnect the battery cable from the connector on the system board.
4. To remove the memory module:
a. Pull the clips securing the memory module until the module snaps-out [1].
b. Remove the memory module from the connector on the system board [2].
Installing memory module
1. Insert the memory module into the connector until snaps in.
24
Disassembly and reassembly
cover.
After working inside your
Before working inside your
cover.
computer.
computer.