Operation - MASSEY FERGUSON 9070 Workshop Service Manual

OPERATION

FIG. 5: All shields and guards must be in the correct
operating position and in good condition.
DO NOT use attachments unless the attachments are
approved optional equipment.
FIG. 6: Do not operate the machine with drive shaft
shields open or removed. Entanglement in rotating drive
shafts can cause serious injury or death. Stay clear of
rotating components.
Do not make adjustments to the roll tension with the
header engaged.
When making adjustments to the roll pressure, turn off the
header. Lower the header to the ground and engage the
parking brake. Set the engine to low idle.
FIG. 7: Never stand near the machine during operation.
Debris can be thrown from the machine during operation
possibly resulting in injury.
m
WARNING: Be
along the side of a road or building. Rocks
or other debris can be thrown from the
machine during
resulting in injury.
Tilt the header back in fields where stones
and foreign objects are present. This will
raise the cutting knives and minimize
debris being thrown by the rotating knives.
4283063M1
careful when operating
operation possibly
Find manuals at https://best-manuals.com
FIG. 5
FIG. 6
FIG. 7
SAFETY
11133566
WC1941
D-8278
1-5