Maintenance - MASSEY FERGUSON 9070 Workshop Service Manual

MAINTENANCE

FIG. 15: Before doing any unplugging, lubricating,
servicing, cleaning, or adjusting park the tractor on a solid
level surface. Put all controls in neutral, center and lock
the steering wheel, and engage the parking lock control
lever. Stop the tractor engine and take the key with you.
LOOK AND LISTEN! Make sure all moving parts have
stopped.
Always chock the wheels before working on or under the
machine.
FIG. 16: When working on the machine make sure the
header is lowered to the ground.
When it is necessary for the header to be in the raised
position, raise the header all the way and engage the
header lift cylinder stops. See Cylinder Stops in the Safety
section for more information.
m
WARNING: Always install the header lift
cylinder stops when working near the
header. Do not rely on the hydraulic system
to keep the header raised. A sudden loss of
hydraulic pressure could cause the header
to lower unexpectedly.
FIG. 17: Never check or adjust drive belts while the
machine is running.
Never remove crop from the machine while the machine
is running.
Moving parts can pull you in faster than you can move
away!
4283063M1
FIG. 15
FIG. 16
FIG. 17
SAFETY
D-8518
WC1954
WC1943
1-9